FD1010-DLR-T-P4S

Features of FD1010-DLR-T-P4S

LKWE FD10 series floating displacement bearings are an ideal high-speed floating bearing solution when the ultimate operating speed is to be reached but the required load carrying capacity is not the decisive factor.

Applications

The scope of application is wide. Our products survive by quality, develop by reputation, and win the market by service.

Send E-mail Request Quote

Parameter

Floating Displacement Bearing Parameters

LYLKWE floating displacement bearing parameters:
FD series angular contact ball bearing model	Size						Installation Size				Rated Load		Limit Speed		Weight
	d	D	B	rsmin	r1smin	s	da	Da	ra	rb	Dynamic load	Static load	Grease lubrication	Oil
	d	D	B	rsmin	r1smin	s	h12	H12	max	max	Dynamic load	Static load	Grease lubrication	A minimum amount
	mm										kN		min		kg
FD1000-DLR-T-P4S	10	26	8	0.30	0.30	1.2	13.5	22.0	0.3	0.30	1.86	0.14	110000	170000	0.02
FD1001-DLR-T-P4S	12	28	8	0.30	0.30	1.2	16.0	24.5	0.3	0.30	2.12	0.17	95000	150000	0.02
FD1002-DLR-T-P4S	15	32	9	0.30	0.30	1.7	18.0	29.0	0.3	0.30	2.80	0.22	80000	120000	0.03
FD1003-DLR-T-P4S	17	35	10	0.30	0.30	2.0	20.0	32.0	0.3	0.30	3.90	0.33	75000	110000	0.04
FD1004-DLR-T-P4S	20	42	12	0.60	0.30	2.3	24.0	37.0	0.6	0.30	4.65	0.40	63000	90000	0.07
FD1005-DLR-T-P4S	25	47	12	0.60	0.30	2.5	28.0	42.5	0.6	0.30	6.55	0.60	53000	75000	0.07
FD1006-DLR-T-P4S	30	55	13	1.00	0.60	2.6	35.0	50.0	1.0	0.60	6.80	0.67	43000	63000	0.11
FD1007-DLR-T-P4S	35	62	14	1.00	0.60	2.7	40.0	56.5	1.0	0.60	8.65	0.90	38000	53000	0.15
FD1008-DLR-T-P4S	40	68	15	1.00	0.60	2.7	45.0	62.0	1.0	0.60	9.50	1.02	36000	50000	0.18
FD1009-DLR-T-P4S	45	75	16	1.00	0.60	3.2	50.0	69.0	1.0	0.60	12.50	1.37	32000	45000	0.22
FD1010-DLR-T-P4S	50	80	16	1.00	0.60	3.2	55.0	74.5	1.0	0.60	12.90	1.50	30000	43000	0.24
FD1011-DLR-T-P4S	55	90	18	1.10	1.00	3.8	60.0	84.0	1.1	1.00	17.60	2.00	26000	38000	0.35
FD1012-DLR-T-P4S	60	95	18	1.10	1.00	3.8	65.0	89.0	1.1	1.00	18.00	2.16	26000	38000	0.38
FD1013-DLR-T-P4S	65	100	18	1.10	1.00	3.8	70.0	94.0	1.1	1.00	18.60	2.28	24000	36000	0.40
FD1014-DLR-T-P4S	70	110	20	1.10	1.00	4.3	76.0	103.0	1.1	1.00	22.40	2.80	22000	34000	0.55
FD1015-DLR-T-P4S	75	115	20	1.10	1.00	4.3	81.0	108.0	1.1	1.00	23.60	3.00	20000	32000	0.58
FD1016-DLR-T-P4S	80	125	22	1.10	1.00	4.8	87.0	117.0	1.1	1.00	29.00	3.75	18000	28000	0.78

Floating Displacement Bearing

LYLKWE Floating Displacement Bearing Parameters
FD Series Angular Contact Ball Bearing Model	Size						Installation Size				Rated Load		Limit Speed		Weight
	d	D	B	rsmin	r1min	s	da	Da	ra	rb	Dynamic Load	Static Load	Grease Lubrication	Oil
	d	D	B	rsmin	r1min	s	h12	H12	max	max	Dynamic Load	Static Load	Grease Lubrication	A Minimum Amount
	mm										kN		min		kg
FD1017-DLR-T-P4S	85	130	22	1.10	1.00	4.8	92.0	122.0	1.1	1.0	30.00	4.00	17000	26000	0.82
FD1018-DLR-T-P4S	90	140	24	1.50	1.10	5.4	98.0	131.0	1.5	1.1	35.50	4.65	16000	24000	1.07
FD1019-DLR-T-P4S	95	145	24	1.50	1.10	5.4	103.0	136.0	1.5	1.1	36.50	4.90	15000	22000	1.11
FD1020-DLR-T-P4S	100	150	24	1.50	1.10	5.4	108.0	141.0	1.5	1.1	38.00	5.20	15000	22000	1.16
FD1021-DLR-T-P4S	105	160	26	2.00	1.10	6.5	112.0	152.0	2.0	1.1	49.00	6.70	14000	20000	1.42
FD1022-DLR-T-P4S	110	170	28	2.00	1.10	6.5	120.0	159.0	2.0	1.1	51.00	7.10	13000	19000	1.83
FD1024-DLR-T-P4S	120	180	28	2.00	1.10	6.5	130.0	169.0	2.0	1.1	52.00	7.50	12000	18000	1.95
FD1026-DLR-T-P4S	130	200	33	2.00	1.10	7.5	141.0	187.0	2.0	1.1	67.00	9.65	11000	17000	2.96
FD1028-DLR-T-P4S	140	210	33	2.00	1.10	7.5	151.0	198.0	2.0	1.1	69.50	10.20	10000	15000	3.13
FD1030-DLR-T-P4S	150	225	35	2.10	1.50	8.6	161.0	213.0	2.1	1.5	85.00	12.50	9000	14000	3.69
FD1032-DLR-T-P4S	160	240	38	2.10	1.50	8.6	173.0	226.0	2.1	1.5	86.50	13.40	9000	13000	4.70

Introduction

FD1010-DLR-T-P4S series high-speed floating displacement bearing description

Floating displacement bearing is an ideal high-speed floating bearing solution when the ultimate operating speed is to be reached but the required load capacity is not the decisive factor. Floating displacement bearings can reach the speed of high-speed angular contact ball bearings, which is twice the speed of ordinary cylindrical roller bearings. Therefore, it is especially suitable for electric spindles. The floating displacement bearing is composed of the outer ring of the ball bearing and the inner ring of the cylindrical roller bearing. Ceramic balls are standard rolling elements. This design ensures that the inner ring can float freely relative to the outer ring during operation. The inner ring is made of Cronidur 30 high-performance bearing steel, which has a higher permissible Hertz contact stress than ordinary bearing steel. The contact between Cronidur 30 and ceramic balls ensures that the inner ring and the rolling elements have sufficient load-bearing capacity. During the assembly process, the bearing clearance must be set according to the operating conditions. The industrial application technology department provides consultation under simulated actual operating conditions.

Floating displacement bearings have the same external dimensions as B70…series bearings or N10…series cylindrical roller bearings, and their sufficient load-bearing capacity and high speed capability provide designers with a new floating bearing layout design. The FD series of floating displacement bearings can be used in existing structures with lower rated load and can easily increase the allowable speed. Provide floating displacement bearings and spindle bearings with seals on both sides (2RSD) or direct lubrication for oil and gas lubrication. Similar to super-precision cylindrical roller bearings, the floating displacement bearing FD bearing series also has a type with a tapered bore inner ring (K). The FD bearing series with radial clearance matching the bearing bore is also provided, which simplifies the arrangement of the bearing on the shaft and allows a variety of bearings to be installed side by side in groups.

“Customized solutions” designed for different floating bearings

Model example:

Tapered inner hole design: FD1017-K-T-P4S

Sealing design: FD1017-2RSD-T-P4S

Direct lubrication design: FD1017-DLR-T-P4S

Quality Standard

Rockewell Bearings has added parameters that are not defined by ISO/ABEC for customers, including preload tolerances, functional tests, traceability and micron codes, cleanliness, raceway curvature, balls, etc. and roundness, surface processing (function And non-functional surfaces), steel specifications, cage trim and design, and installation chamfering. The definition of these parameters improves the quality of precision angular contact ball bearing products, thereby improving the performance of machine tool spindles.
The element of precision angular contact ball bearings is the cage, which is very important for machine tool bearings. The performance of the cage will affect the stability of machine tool bearings under high-speed rotation. The standard cage produced by Rockewell is made of phenolic resin. The internal design and the tolerance of the pocket gap are tight and the guide surface is controlled to ensure the stability of the cage during high-speed operation, lubrication and dynamic load.
The two elements of precision angular contact ball bearings are cleanliness, which is very important for precision angular contact ball bearings. Generally, the parts of the bearing products must be cleaned with a multi-solvent for 3 hours to prevent impurities from entering the bearing and prevent inherent pollution sources. In addition, the non-working surface of the bearing must be ground to ensure that the bearing is free of impurities before leaving the factory. Therefore, the bearing products produced by Rockewell can increase the normal operating time of the machine tool.
There are two main structural design methods for precision angular contact ball bearings: the high-rigidity WI series and the high-speed HX series to meet the requirements of different applications. The basic, open Rockewell bearing design has a higher spindle speed and greater dynamic radial stiffness, so the spindle can cut more material in a shorter time while ensuring excellent finished product tolerances. These improvements are attributed to the combination of the ball body and the precision engineering design of the raceway profile, which improves the processing rate.

Message

Name * Phone *
E-mail*
Country
Message
Email
This field is for validation purposes and should be left unchanged.