TAC Series

Introduction

• The preload has been adjusted and it is easy to install on the machine.
• TAC sealed series lead screw bearing series products with contact and non-contact seals
• There are also universal open TAC sealed series screw bearings
• Bearing retainer made of resin material. Compared with the previous angular contact ball bearings, more steel balls are installed and the rigidity is improved
• It has superior low starting torque and low rotation torque, which can save energy
• To adjust the preload, the assembly on the machine is simple and easy
• Equipped with contact seals with excellent sealing performance and non-contact seals with reduced torque loss and low temperature rise
• Packed with high-performance Dekrupp grease, no maintenance

Details

• Structural points: The inner and outer rings are made of high-purity bearing steel that strictly controls oxide impurities that are harmful to rolling fatigue life. The contact angle is 60º and the number of steel balls is large. The axial rigidity of the bearing is greater; and tapered rollers Compared with the cylindrical roller bearing, the bearing has a small starting torque, which realizes low-driving force and high-precision operation; when used in pairs, it can bear axial load and radial load or combined load.
• Contact angle: 60°
• Cage: Nylon cage guided by rolling elements.
• Speed factor: Grease lubrication DmN≤400000, that is, the limited speed N≤400000/Dm Dm—bearing diameter

Scope of application

TAC series ball screw support bearings can be divided into the following application methods:

1. Preloading method: positioning preloading, position preloading, double nut method, etc.;

2. Circulation method: circulator type, circulating duct type, end cover 式等。 Equations and so on.

TAC series ball screw support bearings can also be used in various industries such as machine tools, spraying equipment, processing centers, confidential testers, automated machinery, electronics, food machinery, packaging machinery, and medical equipment.

Quality Standard

Rockewell Bearings has added parameters that are not defined by ISO/ABEC for customers, including preload tolerances, functional tests, traceability and micron codes, cleanliness, raceway curvature, balls, etc. and roundness, surface processing (function And non-functional surfaces), steel specifications, cage trim and design, and installation chamfering. The definition of these parameters improves the quality of precision angular contact ball bearing products, thereby improving the performance of machine tool spindles.
The element of precision angular contact ball bearings is the cage, which is very important for machine tool bearings. The performance of the cage will affect the stability of machine tool bearings under high-speed rotation. The standard cage produced by Rockewell is made of phenolic resin. The internal design and the tolerance of the pocket gap are tight and the guide surface is controlled to ensure the stability of the cage during high-speed operation, lubrication and dynamic load.
The two elements of precision angular contact ball bearings are cleanliness, which is very important for precision angular contact ball bearings. Generally, the parts of the bearing products must be cleaned with a multi-solvent for 3 hours to prevent impurities from entering the bearing and prevent inherent pollution sources. In addition, the non-working surface of the bearing must be ground to ensure that the bearing is free of impurities before leaving the factory. Therefore, the bearing products produced by Rockewell can increase the normal operating time of the machine tool.
There are two main structural design methods for precision angular contact ball bearings: the high-rigidity WI series and the high-speed HX series to meet the requirements of different applications. The basic, open Rockewell bearing design has a higher spindle speed and greater dynamic radial stiffness, so the spindle can cut more material in a shorter time while ensuring excellent finished product tolerances. These improvements are attributed to the combination of the ball body and the precision engineering design of the raceway profile, which improves the processing rate.